DIY - Iron-on Decal Instructions

To apply your iron-on decal, you can use a:

This iron-on material adheres to:

Home iron instructions:

Set iron dial between Cotton and Linen
Peel your decal/clear carrier sheet off of the paper backing and place onto your garment (shirt, etc) on a flat, hard surface (ironing board not recommended)
- Fun fact: Your decal is taped to the backing with heat-resistant tape; you can use this tape to hold your design to your fabric!
Cover design with Teflon sheet or piece of parchment paper (not necessary but recommended)
Put iron on top of design with medium/firm pressure (do not slide iron) for 10-15 seconds
Peel clear carrier sheet hot or cold
- If areas of design lift after application, replace Teflon sheet/parchment paper and re-press for 5-10 seconds

Heat press instructions:

Set heat press to 305°F/150°C
Preheat garment for 2-3 seconds
Peel your decal/clear carrier sheet off of the paper backing and place onto your garment (shirt, etc) on a flat, hard surface (ironing board not recommended)
- Fun fact: Your decal is taped to the backing with heat-resistant tape; you can use this tape to hold your design to your fabric!
Cover decal with Teflon sheet or piece of parchment paper (not necessary but recommended)
Press design to garment with medium pressure for 10-15 seconds
Peel clear carrier sheet hot or cold
- If areas of design lift after application, replace Teflon sheet/parchment paper and re-press for 5-10 seconds

Cricut EasyPress instructions:

Set EasyPress to 305°F/150°C
Preheat garment for 2-3 seconds
Peel your decal/clear carrier sheet off of the paper backing and place onto your garment (shirt, etc) on a flat, hard surface (ironing board not recommended)
- Fun fact: Your decal is taped to the backing with heat-resistant tape; you can use this tape to hold your design to your fabric!
Press design to garment with medium pressure for 10-15 seconds
Peel clear carrier sheet hot or cold
- If areas of design lift after application, replace Teflon sheet/parchment paper and re-press for 5-10 seconds

Care instructions: